Vertical CNC Machining Center

MCV 1680, 1686, 2096 Series vertical machining center structure of 45 mm four sliding table and linear guide ways on Y axis, providing heavy loading capability. These models are specially customized processing of middle-large scale components and parts. It is suitable for the parts processing with high precision, such as milling, drilling, tapping and mold finishing. Key facility in industries of general machinery, car parts, aviation and mold makers.

Introduction
Please Select

MCV 1680, 1686, 2096

Table Size X-Axis Travel Y-Axis Travel Z-Axis Travel
MCV 1680 1800 x 800 mm 1600 mm 800 mm 750 mm
MCV 1686 1800 x 830 mm 1600 mm 860 mm 700 mm
MCV 2096 2200 x 900 mm 2000 mm 960 mm 750 mm
Features
Meehanite cast iron.
Up to 7, 7, 4.5 KW X, Y, Z Axis Servo Motors Rate (model 2096)
Mitsubishi M 70A series Controller. 8.4“ LCD screen.
24,24,15M/min rapid travers on X, Y, Z axis.
55mm*4 linear guide ways on Y-axis.
Up toφ63, 63, 50 X, Y, Z Axis Ball Screw Diameter (model 2096)
Heavy-duty box way column on Z-axis.
P4 Class bearings.
BT-50 Precision spindle taper.
Directly connected ball screw and AC servomotors.
6.000rpm, Two Step Gear Box.
24 tools Arm type ATC.
15/18.5KW Spindle Motor
Screw Type Chip Conveyor
Technical Specifications Unit MCV-1680 MCV-1686 MCV-2098
Table
Table Size mm 1800*800 1800*830 2200*900
Table T-slot mm 18*5*150 18*5*150 18*5*150
Loading Weight kg 2100 2100 3000
Travel
X Axis Travel mm 1600 1600 2000
Y Axis Travel mm 800 860 960
Z Axis Travel mm 750 700 750
Spindle
Spindle Nose End to Table mm 150-900 200-900 200-950
Spindle Center to Column mm 855 910 1030
Spindle Motor kw 15 / 18.5 KW 15 / 18.5 KW 15 / 18.5 KW
Spindle Diameter mm ∅100 ∅100 ∅100
Spindle Speed rpm 6000 6000 6000
Spindle Taper BT-50 BT-50 BT-50
Spindle Driver Belt Type Gear Head Gear Head
X,Y,Z Axis Servo Motors
X,Y,Z Motor Rate (Mitsubishi) kw 4.5 , 4.5 , 4.5 4.5 , 4.5 , 4.5 7 , 7 , 4.5
Guide Way
X Axis Rail Type mm 55mm*2 Linear Way 55mm*2 Linear Way 55mm*2 Linear Way
Y Axis Rail Type mm 55mm*4 Linear Way 55mm*4 Linear Way 55mm*4 Linear Way
Z Axis Rail Type mm Box Way Box Way Box Way
Feeding Speed
Rapid Traverse (X,Y,Z) m/min 24 , 24 , 18 24 , 24 , 15 24 , 24 , 15
Cutting Feed Rate (X,Y,Z) m/min 10 10 10
Ball Screw Diameter
Axis Diameter X,Y,Z mm 50 , 50 , 50 50 , 50 , 50 63 , 63 , 50
ATC
Tool Change type Arm type Arm type Arm type
Tool Storage Capacity
Max. Tool Length mm 350 350 350
Max. Tool Diameter mm ∅125 ∅125 ∅125
Max. Tool Weight kg 15 15 15
Tool Changing Time sec. 3 3 3
Accuracy
Full Travel Positional Accuracy mm 0.005 0.005 0.005
Repeated Precision Accuracy mm 0.002 0.002 0.002
General Spec
Machine Net Weight Ton 12 14 17
Mitsubishi M 70A series Controller. 8.4“ LCD screen.
Air Blow/ Cutting Fluid
24 Tools Arm Type ATC
Electric Machine Operation Manual
Automatic Lubricating Device
Spindle Cooling System
Cutting Coolant
Air Gun/ Water Gun
Working Lamp
Full- enclosed Splash Guard
Working Table Splashier
CE Requirements
Three Step Warning Lamps
Transformer
Rigid Tapping
External Hand Wheel
Horizontal Adjusting Bolt and Pad
Electric Cabin with Head Exchanger
Tool for Adjustment
Screw Type Chip Conveyor
  • Controller;
    - Mitsubishi M720
    - Fanuc OIMD Alpha
    - Heidenhain ITNC 530
  • Spindle;
    - BT 40 10.000rpm Direct Drive (15/18.5 KW)
    - BT 40 12.000rpm Direct Drive (11/15KW)
    - BT 40 15.000rpm Direct Drive (7.5/11KW)
    - BT 50 10.000rpm Direct Drive (15/18.5 KW)
  • Coolant Through Spindle 20 Bar (CTS)
    - Paper Filter and Water Tank
  • Air Through Spindle (ATS)
  • Inner Water Flushing System with Water Pressure Pump
  • Spindle Jet Coolant Around Spindle
  • Link Type Chip Conveyor
  • Linear Guide Way Z Axis
    - Piston Supported Z axis
  • Counter- balance Weight System